43
Fig.34
Fig.35
Installation
：
——Clean cylinder head and valve cover contacting surface.
——Push the wedge of valve cover seal gasket into appropriate valve cover groove,
integrating valve cover with seal gasket.
——Install valve cover and seal gasket assembly on cylinder head.
——Install 9 hexagon head bolts of long column end with butterfly gasket
，
finger screw them
into cylinder head.
——Tighten bolts in two steps in order as diagram showed. Step 1
：
Tighten to 4.0—6.0Nm
Step 2
：
Tighten to 8.0—10.0Nm
【
5
】
.
Timing belt removal, installation and adjustment
Removal
：
——Rotate crankshaft to no.1 cylinder compression TDC.
——Loosen 2 tension pulley mounting bolt (as arrow indicated in diagram)
，
push
tension pulley aside with a large screwdriver.
in this position.
——To release belt tension
，
tighten 2 tension pulley mounting bolts with tension pulley
——To reuse belt
，
mark the direction of belt rotation and make reference mark on
crankshaft gear and camshaft gear matching teeth
，
remove belt from camshaft gear, water pump gear and
crankshaft gear.
Fig.36
Fig.37
