9
Fig. 7
G.
Break-in
The first month is most important in the life of your vehicle. Proper operation during this break-in
period will help assure maximum life and performance from your new vehicle. The following
guidelines explain proper break-in procedures.
1.
After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
2.
Drive vehicle from stop to low speed slowly.
3.
Avoid braking strongly.
4.
Do not exceed the vehicle speed on the below schedule
The speed of vehicle
The first 1000 km
Max speed in each gear
1
st
Gear
25km/h
2
nd
Gear
45km/h
3
rd
Gear
70 km/h
4
th
Gear
100km/h
H.
Starting And Operating Instructions
a.
Before starting the engine, be sure that the driver is seated properly in the ATV and tighten the
seatbelt.
b.
Testing the ATV in a open place at the beginning to learn how to start, turn and stop.
c.
Operate the ATV slowly until you are familiar with it.
d.
The turning radius of this ATV is small and agile
, so the centrifugal force is very high when
turning at high speed. Slow down to a more controllable speed when turning to prevent the ATV from
rolling over.
e.
To prevent vehicle from rolling over, be sure to only turn the vehicle at a slow more controllable
speed.
