Checking list
Now you know well on the whole chip process, Please check the following
items before starting and after shutting down.
Items checked before start
● Preparation for emergency is ready.
● Two adults are must for chipping work with this machine.
● All person should be dressed up in proper way and protected by related
euipments.
● Check the work site marked with warning ribbon thoroughly.
● Work site preparation, material, work pathway, chips collecting site
● Check if there are parts worn, cracked or missed, untightened.
● Machine preparation, oil, fuel, hydraulic oil...
● No objects, such as debris, rocks or tools in hopper.
● All covers are firmly fixed
● Tire is with right pressure.
● Recheck regular daily maintenance chart.
Items checked after stop
●Control rod is on position of stop.
●Take off starting key. Switch off power supply.
●Drum stop completely.
● Completely cool down for 15-20 minutes
●All cover are firmly fixed and locked
● Work site cleaning work finished
● It is clean inside hopper
● Make sure tow coupling is connected properly and firmly
Clean
Never put those debris and twigs you clean up from worksite into hopper,
as you can not feed them into roller in proper way. what is worse, these
debris could contains sands or small rocks which could damage machine
seriously.
While transporting, nothing is allowed in hopper or on the machine.
16
Summary of Contents for RATEL RC180 D
Page 46: ...45...
