All cover on bearing, can protect operator from being stuck and debris from
damaging bearing.
Roller can rotate in two directions, forwarding and reversing controlled by
control rod.
Maintenance：
While teeth is worn, the roller should be changed.
All rotating parts should be covered or locked firmly. Any touching could cause
serious injuries or deaths.
Danger
How to use：
There is safety switch on drum housing, only if the housing cover is locked,
machine can be started.
Function
Drum, which cuts branches into chips
Drum
Chipping process
1. Material fed into roller
2. Roller hooks material and pull it into drum housing
3. Material pulled into anvil and drum
4. Blades on drum starts cutting material sides by sides
5. Impeller on drum supplies air blowing chips out of houseing through output
chute.
Lock rod
24
Summary of Contents for RATEL RC180 D
Page 46: ...45...
