Jonco RATEL RC180 D, Manual

Page: 6 / 46

Bystanders, Kids and the untrained safety
●Children, bystanders is not allowed in work site
●Bystanders should be protected by PPE.
●All untrained persons are not allowed to use the machine.
●Warning before starting machine.
Operation safety
Preparation before starting
●Check if users are dressed up in right way as instructed.
●Chipping work should be done by at two person, who are able to take care
of each other in case of emergency.
●Do not work with machine after drinking or under affecting of medicine.
●Regular checking before starting
●Check if there is damaged, worn or missing parts.
●Confirm the collecting site of chips
●Check and set up the machine in right status.
●Machine should be located away from water, gas, electric cable or
power station.
●Machine should be kept in flat in horizontal level.
●Parking machine with wheels stopped by blocker
●Chipping work should be done in open bright area.
Operating safety
●No climbing on machine during working.
●Keep machine and operators in balance while working.
●Keep away from all working parts.
●Touching working part could cause serious injuries.
●Do not get close before working is fully stopped.
●Stop machine and switch off all safety switch before maintenance.
●Do not keep the engine running with clutch released over 3 minutes
5