Storage safety
●Switch off engine, and take key away.
●Some parts of machine are still hot just after shutting down. Keep machine
fully cool down before maintenance.
●Tow coupler should be firmly connected with safety chain connected too.
●Parking should be with wheel blocked.
●Parking distance is suggested to be 15m.
●Cleaning should be done after working.
Fuel safety
●Make sure engine is completely cool down before refilling fuel.
●Fuel are flammable, explosive, Do not fill fuel near fire or while smoking.
●Fuel should be stocked in regulated container.
●No flammable liquid on machine.
Parking and transport safety
●Parking on a level and stable ground, and the machine site is parallel to the
ground.
●If the chipper is towed, make sure that the towing point is firmly connected
and the safety chain is also properly connected. The trailer's brakes are on
and no one is in the trailer
●If the shredder is not towed, make sure to secure the wheels with wheel
chocks.
Daily check
●Lubricate all bearing points.
●Pay attention to volume of hydraulic oil, oil and fuel.
●Cleaning work, clean all chips, debris out of rotor housing, clean all oil,
lubricants spoiled
●Pressure of hydraulic should be released before any maintenance.
6
Summary of Contents for RATEL RC180 D
Page 46: ...45...
