RC155PTO Components
1. Hopper, where you feed material into roller
2. Control handle, by which you control feeding, stopping, rejecting material
or stop for emergency
3. Roller, which is rolling by hydraulic to pull material in to drum housing
4. Housing cover, where you can open and check or change blade
5. Output chute, which can be turned 360 degrees for chips collecting
6. Deflector, which you can adjust throwing angle
7. Spline shaft, which connects to tractor for power transmission
8. Reverse valve, is to control forward, stop and reverse
9. Hydraulic tank cap, where you fill hydraulic oil
10. Hydraulic tank, which is container for hydraulic oil
11. Hydraulic oil gauge, where you can read oil volume level and
temperature
12. Speed control valve, which control speed of roller/ feeding speed
13. Serial plate, which contains product info and serial number
20
Summary of Contents for RATEL RC180 D
Page 46: ...45...
