Output chute adjustment：
●Be sure there is no debris left in hopper and output.
●Point the site for chips collecting. this chute can swirled by 360 degrees.
●Change the throwing angle by adjustment of deflector. and notice all
bystanders out of work site.
Rotor housing cover：
Be sure all covers are closed and fixed. or the machine can not be start due to
safety system.
Lock rod
Preparation of PTO chipper：
●Be sure of right and tractor power and correct connection
●Be sure the 3 points hinge is fixed right.
●Chipper and tractor should be in line at same horizontal level.
●Parking tractor and make sure the chipper landed on the ground, before
starting.
11
Summary of Contents for RATEL RC180 D
Page 46: ...45...
