41
2.7 Caldo Control
The Caldo Control is a Jolly-Mec patented device enabling automatic adjustment of the primary combustion air according to the air
temperature read by the bulb (
F
ig
. 5
) in the boiler.
This device gradually reduces the combustion air flow when the air temperature rises. The Caldo Control optimises stove fuel
consumption, thus extending burn time. The Caldo Control must only be activated in wood-burning mode (
F
ig
. 1
); during pellet mode
operation, push the lever indicated in
F
ig
. 2
all the way to close the air inlet.
The Caldo Control can be adjusted, after a settling stage, by operating the adjustment screw (
F
ig
. 6
).
F
ig
. 1
F
ig
. 2
F
ig
. 3
Wood mode: pull the lever in the direction of the red
arrow (air open)
Pellet mode: push the lever all the way in the
direction of the red arrow (air closed)
Wood mode: Caldo Control grille open (with stove just
lit or in shutdown stage)
F
ig
. 4
F
ig
. 5
F
ig
. 6
Wood mode: Caldo Control grille closed (with
stove hot)
Caldo Control bulb support (on top of stove)
Detail of inside of stove after removing the cast iron
grates and fire bed. Turn the adjustment screw until
the damper starts to close.
Caldo Control adjustment
screw (use an Allen key or
by hand)
Summary of Contents for FOGHEA
Page 46: ...46 Notes...
Page 47: ...47 Notes...
