Jolly Mec FOGHEA, Installation, Use And Maintenance Card

Page: 18 / 48

18
9.
Press to select to the shutdown minutes and set them with .
Programme setting is completed.
8.
Press to select shutdown time and set it with .
7.
Press to select the lighting minutes and set them with .
1.7 New-generation simplified electronic controller
1.7.12 Chronothermostat
NOTE!
• Every programme set on the chronothermostat will be used by the electronic controller.
• To enable the chronothermostat the electronic controller must be ON, set to pellet mode, and the chronothermostat must be activated from
the Quick Menu.
• Chronothermostat operation is subordinate to the current time and day setting.
6.
Press to select the lighting time and set it with .
* CHRONOTHERMOSTAT *
PROGRAMME = 01 __ Tu
We Th Fr Sa Su
ON = 12 .00 OFF = 14.30
* CHRONOTHERMOSTAT *
PROGRAMME = 01 __ Tu
We Th Fr Sa Su
ON = 12. 00 OFF = 14.30
* CHRONOTHERMOSTAT *
PROGRAMME = 01 __ Tu
We Th Fr Sa Su
ON = 12.30 OFF = 15 .00
* CHRONOTHERMOSTAT *
PROGRAMME = 01 __ Tu
We Th Fr Sa Su
ON = 12.00 OFF = 15. 00
• Chronothermostat programme management
(each programme number corresponds to a lighting and shutdown with time and
days of the week to be set)
• End of chronothermostat setting operation
• Chronothermostat activation or deactivation
10. Press and, with the selected programme number flashing,
keep pressed until the set lighting days are reset.
- To
go to another programme number
press or when the number flashes (see point 4).
- To add other programmes , set other numbers (Example programme: 02, 03, 04….) repeating the operations from point 4 to 9.
- To
change the times or the days of the programmes,
repeat the operations from point 4 to 9.
- To
cancel a programme
, repeat the operations from point 1 to 3, and carry out the operation of point 10.
* CHRONOTHERMOSTAT *
PROGRAMME = 02
Mo Tu We Th Fr Sa Su
ON = 06.00 OFF = 09.30
* CHRONOTHERMOSTAT *
PROGRAMME = 02
__ __ __ __ __ __ __
ON = 06.00 OFF = 09.30
12.
Press 4 times to shift the cursor to
”DISPLAY”
.
11.
Press twice to exit chronothermostat setting.
* CHRONOTHERMOSTAT *
PROGRAMME = 02 Mo
Tu We Th Fr Sa Su
ON = 12.30 OFF = 15.00
13.
Press to return to the main screen.
14.
Press to select the Quick Menu item
”SET HOURS-DAY”
.
15.
Press and then 3 times so that the setting flashes.
Press to activate or to exclude. Press twice at the end of programming.
CHRONOTHERMOSTAT
>
>
DISPLAY
ALARM MANAGEMENT
MANUAL DRIVES
SET UP
>
>
> Tuesday 08.31
*
SET HOURS-DAY
*
CHRONOTHERM. = EXCLUDED
> Tuesday 08.31
*
SET HOURS-DAY
*
CHRONOTHERM. = ACTIVE
01