40
2.6 Fitting the damper and regulating unit
F
ig
. 2
Regulating
unit
Position
indicator
Rod
Screws
Dial
Grub
screw
Box
The fume damper must be assembled so that when the damper
is in vertical (nearly completely open), the dial horizontal (with
the index on the right) and the position indicator (IIII position)
also on the right, the rod can be easily removed for flue cleaning
unscrewing the extern screw, fixed on its own holding block (see
fig. 1
). By assembling take care to position the damper lever in the
centre of the chimney. The damper is laterally mounted , putting the
rod into the pre-positioned hole in the display holder box.
Fasten the support box for the regulating unit inside the cladding,
with the supplied screws (see
Fig. 2)
. Assemble the regulating unit
on the rod and secure it with its grub screw. Turn the central pin
right and left in order to fasten the regulating unit to the box (with
its screws), keeping the position indicator on
the right. Use
pressure to assemble the dial.
Proceed as follows:
F
ig
. 1
Damper
Dial with
regulating unit
Rod
Screw
Smokes damper
control Lever
Summary of Contents for FOGHEA
Page 46: ...46 Notes...
Page 47: ...47 Notes...
