36
After preparing the flue and all the electrical and plumbing
connections and air intakes, as described in the previous
pages, position the stove and level it, adjusting the feet with a
19 mm wrench (see
F
ig
. 1
).
2.3 Adjusting the feet
F
ig
. 1
2.4 Foghea air heating stove cladding assembly steps
The stove is supplied in two wooden crates on pallets, with the
boiler body and cladding to be assembled on the spot after
preparing and preassembling all the outside air intakes, the flue
and the electrical connections.
The various parts of the cladding must be handled with
particular care, whether satin finished, polished or
painted, as they could be scratched or dented during
handling and assembly.
It is advisable to handle the various parts of the cladding without
removing them from the original packing.
For better stove operation and efficiency it is advisable to
connect the hot air fan suction pipe (pipe Ø120 mm) to
the outside, knocking out the precut sheet on the left side/
rear panel, located at the bottom, in the position indicated
by the arrow (A).
Also, connect the pipes of the combustion fan (B) and the
Caldo Control (C) to the cladding.
NOTE!
The flue must be installed in such a way that it can be
disassembled for possible cleaning or removing the cladding.
A
B
C
Summary of Contents for FOGHEA
Page 46: ...46 Notes...
Page 47: ...47 Notes...
