Jolly Mec FOGHEA, Installation, Use And Maintenance Card

Page: 10 / 48

10
Hot air fan
Ancillary activation Diverter valve
(only water version)
Combustion air fan
Ignition electrical element
ON OFF
1.7 New-generation simplified electronic controller
1.7.1 Description of the simplified electronic controller for air heating
The simplified electronic controller is a new-generation device
equipped with a chronothermostat with programmes to be
personalised, enabling easy management of control functions.
The electronic controller buttons enable:
- management of supplementary pellet hoppers. An acoustic
signal sounds when the pellets in the hopper are finished.
- The electronic controller enables automatic switching from
wood to pellet mode by pressing the ”wood” button again (the
corresponding LED flashes) and manually switching on the
wood combustion air fan at power level 2.
- Approx. 30 minutes after the boiler temperature has fallen
below the set limit the fireplace automatically lights in pellet
mode at the preset power level, even with the grille temporarily
over the burn pot (with damper open 45°). If the pellets do not
burn properly, the burn pot can be manually cleaned two or
three times in a row.
LEDs
BUTTONS
Quick Menu for the various
operation stages and programming
Manual pellet loading and burn pot
cleaning
Check parts and reset alarms
(Press 4 sec.)
Summer Switching on (chronothermostat
active with LED flashing)
Winter Pellets
Reset and exit screen
Increase (+)
Decrease (-)
Confirm modifications
and enter submenu
Standby and frost protection
(brazier with flashing LED)
Wood and automatic switching
from wood to pellet mode (with LED flashing)
It shows the various available functions. Stop on the
function you wish to set or change by pressing the
up or down arrows. Also enables chronothermostat
programming
Increase combustion air up to
20%
Modify room temperature
Increase pellet feed up to 20%
Change language
Modify power
Chronothermostat programme
Increase comb. air. in wood mode
Reduce combustion air up to
10%
Modify room temperature
Reduce pellet feed up to 20%
Change language
Modify power
Chronothermostat programme
Reduce comb. air in wood mode
Manual pellet loading (set to OFF) Manual burn pot
cleaning (set to ON)
Check parts and reset alarms
Select parameter to be modified and confirm
modifications
+
modify
pellet
/
clean
-
Pump (only water
version)
Pellet motor