Jolly Mec FOGHEA, Installation, Use And Maintenance Card

Page: 15 / 48

15
1.7 New-generation simplified electronic controller
1.7.7 Silencing an alarm
Press the button
TEST
until the alarm is reset. Fireplace
operation is restored.
If the alarm does not reset and the message
”TO SEE
ALARMS” flashes on the display
press the buttons
ESC
and
to enter
“ALARMS MANAGEMENT”
(without code) and keep
the button TEST pressed until the alarm is cancelled, not before
having eliminated the problem that caused the alarm.
BUTTONS
esc
-
1.7.9 Humidifier use
The stove has an incorporated manual-filling humidifier.
The water must be added in the stove at the special filling point
(
max. capacity: 1 litre
).
Remove the cap on the left of the front grille (Fogo model), or on
the right of the single unit (Foghea model, as shown in the figure),
and fill; the humidifier is full when the water reaches the level.
Do not overfill, since the spilling of excess water can
damage the fan.
1.7.8 Summer ventilation
To use the stove for summer ventilation of rooms, proceed as
follows:
Switch on the electronic controller by pressing ON.
Press the Summer button and check that the corresponding
LED is lit.
BUTTONS
s
ummer
ON
on
NOTE!
If the stove is set to Summer mode, AUTOMATIC PELLET IGNITING IS NOT POSSIBLE.
IMPORTANT!
It is advisable to use the plastic container supplied. Balsamic essences can be added to the water to perfume the air.
Foghea, single unit
without cladding:
humidifier filling point
To enable fan activation, enter the Quick Menu with the MODIFY button and scroll by pressing it
repeatedly until the display shows
“AMB. AIR FAN MODE”
Then, with the buttons , select manual operation, setting “ MAN ”
To increase or decrease the air delivery, scroll by pressing
MODIFY
repeatedly until the display
shows
“SET AIR FAN SPEED”
Then, with the buttons , increase or decrease the air delivery as required.
> 20
*
SET AIR FAN SPEED *
Max = 35 Min = 0
> man
* AMB. AIR FAN MODE. *
Man Aut