Johnson Controls IFC-3030, Programming Manual

Page: 145 / 156

IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 145
Glossary
Type Code A Type Code is a software function that specifies the function of a detector, control
module, monitor module, transponder point, NAC, or Panel Circuit point. (You can select a Type
Code while programming a point). The Type Code specifies what action the control panel takes
when the point activates. For example, when a monitor module with evacuate as a Type Code
activates, the control panel activates all outputs, as if someone pressed the drill key.
Upload A function for making a copy of a system program and storing the program as a file on a
personal computer. Also see VeriFire™ Tools Programming Utility.
VIEW® (Very Intelligent Early Warning) System A smoke detection system, consisting of the
IFC-3030 control panel and intelligent laser detectors, that provides very early warning of
smoldering fires.
VeriFire™ Tools Program Utility A software utility for uploading and downloading a system
program between a personal computer and the control panel through the EIA-232 port.
Walk Test A feature that lets a single (qualified) maintenance person to test a fire alarm control
panel and initiating devices without causing the control panel to enter into an alarm state.
Zone Map SLC and panel circuit inputs (detectors and monitor modules) and outputs (control
modules) provide for up to ten zone selections for CBE.