REV 02 OCT 2020 JLT4500-IOM-F
43
6 DISMANTLING OF THE LIFT AND SCRAPPING
The system must be put out of service and disassembled only when its replacement has been decided. Regardless of any
considerations on the convenience of the reuse of the lift either in part or as a whole, it must be stressed that the scattering of
potentially toxic components is extremely hazardous. The lift was built mainly with metals, plastic materials, electric power cables,
oils and lubricants if the demolition is carried out by your personnel, the various components must be divided by sorting them by
type. These are to be handed over to specialized and (authorized) firms for the disposal of the various materials:
•
Aluminum-steel-copper
•
Plastic-rubber
DANGER
Hand over the used hydraulic oil only to the authorized firms that operate in compliance with the locally enforced law.
DANGER
Hand over all the material to authorized companies that operate in compliance with the locally enforced law.
7 TECHNICAL ASSISTANCE
The technical service office of
JohnBean
is always available to answer your questions and satisfy your requests
Manufacturer
Snap-on Equipment Hungary Kft.
Address
Somfalvi u. 13. Sopron 9400 Hungary
Telephone
+36 99 31 30 25
Fax
+36 99 31 22 32
www.snapon-equipment.eu
8 TROUBLE SHOOTING
SYMPTOMS
CHECK POINT
ACTION
The control box is not working
a)
Damaged fuses
b)
There is no power
c)
Top limit Switch is not working properly or is
activated.
a)
Check the fuses and replace if needed.
b)
Check the electric line
c)
Refer to Snap-on Technical assistance
The lift is not going up
a)
The quantity of oil in the tank is insufficient
b)
Main Switch is not working properly
c)
The hydraulic lowering valve is jammed open
d)
The Oil Filter is dirty
e)
Top limit Switch is not working properly or is
activated.
a)
Add hydraulic Oil
b)
Check the Main Switch and its electric
connections
c)
Check and clean the hydraulic valve, if needed
replace
d)
Check and clean the oil filter, if needed replace
e)
Refer to Snap-on Technical assistance
The loading capacity is lower than
rated
a)
The max pressure valve is not properly set
b)
The pump is not working properly
a)
Refer to Snap-on Technical assistance.
b)
Check and clean the pump, if needed replace
The lift is not completely lowering
a)
The hydraulic lowering valve is not working
properly
b)
There is an object under one of the carriages
a)
Refer to Snap-on Technical assistance.
b)
Raise the lift and remove the object
Summary of Contents for JLT4500S
