REV 02 OCT 2020 JLT4500-IOM-F
14
5.1.1 LAYOUT:
The lift has been designed for an exclusive use on the indoor. It has not been considered and thus it is not allowed its use on the outdoor.
DANGER
Verify that all around the lift there is sufficient space in order to guarantee the correct use of the lift, according to the dimensions of
the car to be repaired and in the respect of the local safety norms.
DANGER
Avoid working in conditions of insufficient light.
Check the height of the area where the lift is to be installed, see
Table1
and
Fig. 3
. Clearance should be calculated based on the full raised
height of the lift.
DANGER
Failure by purchaser to provide adequate clearance could result in unsatisfactory lift performance, property damage, or personal
injury.
5.1.2 IDENTIFICATION AND CE MARKING LABEL:
On the metallic plate applied to the lift the following information are indelibly indicated:
-
-
Full Name of the Manufacturer.
-
Country of Manufacture.
-
Model of the lift.
-
Date of Manufacturing.
-
Full address of the Manufacturer.
-
Type of the lift.
-
Serial number of the lift.
-
CE Logo.
The data indicated on the nameplate shall be always called back for any need of assistance and request of spare parts.
5.1.3 FORECASTED USE:
This device was designed for raising vehicles. It was not designed for any different use.
In particular, it is prohibited to use the lift to raise persons, or using it as scaffolding, washing vehicles, exerting pressure.
Any accessory or part installed on the lift or the vehicle shall be comprised in the compute of the raised weight. For this reason strictly it is
prohibited to use accessories not specifically designed by
JohnBean
for the use on the
JLT4500
type lift.
DANGER
Do not overload for any reason the lift. The maximum allowable lifting weight is equal to
4500 kg; this is understood to be the maximum total weight that can be loaded on lift,
thus it does not refer, e.g., just to the simple empty mass of the vehicle.
DANGER
Only use original accessories approves by JohnBean for the specific use with the JLT4500 type lift.
Summary of Contents for JLT4500S
