JCM Part No. 960-000097R_Rev. 3
© 2010, JCM American, Corporation
6 - 2
Section 6
Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU) Programming, Calibration & Test
2. Figure 6-3 illustrates the UBA’s DIP Switch,
LED indicators and external port locations.
Software Downloading Procedure
Program Installation
The following PC initialization functions are
required prior to downloading software.
1. Create and name a new folder on your PC.
2. Decompress the.ZIP file and save the
expanded file program contents in the file
folder just created.
3. Open the folder and Double-Click on
"
Setup.exe
" of the expanded UBA Pro-
gram.
4. The
UBA Downloader
screen shown in Figure
6-4 will appear. Click the
button
to continue the installation.
5. Enter
a
User Name:
and
Organization:
in the
fields displayed by the
“Customer Identifica-
tion Screen”
and Mouse-click on the
Next
Screen Button as shown in Figure
6-5.
6. Confirm the folder name given during Step 1
to install the UBA Downloader and Mouse-
click on the
Next>
Screen
Button
as shown in the Figure 6-6
“
Destination
Folder”
Screen.
7. The
Ready to Install the Program
screen
shown in Figure 6-7 will now appear. If the
folder selection and customer information is
correct, Mouse-click on the
Next>
Warning: Make sure the External Power
Supply is OFF when connecting the
harness to the UBA. Failure to do so
may cause electrical shock and/or
permanent damage to the equipment.
Figure 6-3
UBA DIP Switch & Port Location
Figure 6-4
Initial Setup Screen
NOTE: One of two selections for a
application installer must also be made
below the information fields.
Figure 6-5
Customer Information Screen
NOTE: If the folder name given during
Step 1 does not appear under the
Install
UBA Downloader To:
line, Mouse-click on
the
Change…
Screen Button
and find the correct folder on the PC.
Figure 6-6
Destination Folder Screen