background image

 JCM Part No. 960-000097R_Rev. 3 

 © 2010, JCM American, Corporation 

2 - 1 1

Installation/Operation

  Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU) Section 

2

If a Bill jam occurs when the centering mechanism 
is closed, the cover will not open. To un-jam the 
unit, recycle power and allow the unit to reset.

Cleaning/Preventive Maintenance

To clean the lenses, use a lint-free cloth and a mild 
non-abrasive detergent such as liquid dish soap 
mixed with water. It is important to keep the bill 
path, rollers, and belts clean. Use a soft lint-free 
cloth or a cotton swab to wipe dirt and stains from 
the surfaces of the magnetic and optical sensors, 
rollers and belts. The sensor lenses are transparent, 
and made of a polymer material. Handle them with 
care. Repeat the cleaning process as needed until 
the Transport path is free of contaminants 
(See Figure 2-18).

Available Cleaning Card

A second generation JCM Waffletechnology Bill 
Validator Cleaning Card is now available  (JCM 
Part No. 

501-000180R

, Manufacturer’s Part No. 

KWJCM-B2B15M). The cleaning card is designed 
to be used as a supplemental part of a Preventive 
Maintenance program to help in reducing dirt and 
paper dust build-up within a unit. This will opti-
mize performance between regular Preventive 
Maintenance intervals. This is the only cleaning 

card authorized for use on the UBA Gaming 

Validator (See Figure 2-19).

 

C

ARD

 F

EATURES

•  A unique Waffletechnology design that hugs 

all surfaces to insure complete surface cleaning 

•  Specially designed scrubber patterns insure 

that belts and O-ring rollers are cleaned and 
lubricated to prevent them from drying out.

D

IRECTIONS

 F

OR

 U

SE

1.  Remove cleaning card from pouch and insert 

it into the Bill Validator.

2.  The cleaning card will be accepted and then 

automatically feed in-and-out several times.

3.  Insert and HOLD cleaning card while the

Validator pulls on it to ensure proper belt 
cleaning.

4.  Dispose of used card in an environmentally 

safe manner.

For more information and a list of Authorized 

Waffletechnology Distributers visit: 

http://www.jcmwaffletechnology.com.

NOTE: If recycling the power fails to clear 

the jam, use a 2.5 mm Hex Nut 
Driver (JCM part # 501-000131) to 
rotate the mover guide shaft, then 
open the Top Cover to remove jam 
(See Figure 2-17).

Do not use alcohol, thinner or citrus 

based products for cleaning any 

surfaces.

Figure 2-18 

UBA Cleaning Locations

Figure 2-19 

JCM Waffletechnology Cleaning Card

New Cleaning Card

Cleaning Card Pouch

Summary of Contents for UBA Series











































































































































Reviews: