JCM Part No. 960-000097R_Rev. 3
© 2010, JCM American, Corporation
2 - 8
Section 2
Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU)
Installation/Operation
Figure 2-9
Optional Conversion Board External Interface Connection Structure
NOTE 1: The 24VDC/ to 13.5VDC Conversion DC/DC Converter is NOT mounted on the JAC # 300-200139R (EDP #123523) Circuit Board.
NOTE 2: Used for the JAC # 400-100556RA (EDP #124736) Harness.
NOTE 3: Used for the JAC # 701-100095R (EDP #124738) Harness.
The pin assignments for
and
are listed in Table 2-8 & Table 2-9 respectively.
Table 2-10
Connector CN2 Pin Assignments
Pin No.
Signal Name
1
M Reset
2
T
XD
3
R
XD
4
Interface Ground
Connector CN2
Header: 53103-0430 (Japan Molex)
Contact Type: 50083-8014 (Japan Molex)
Housing: 51030-0430 (Japan Molex)
Table 2-11
Relay Connector Pin Assignments
Pin No.
Signal Name
1
24 VDC
2
12 VDC
3
Interface Ground
Relay Connector
Header: 51029-0310 (Japan Molex)
Contact Type: 50087-8014 (Japan Molex)
or 70021-00041 (USA Molex)
Housing: 51030-0330 (Japan Molex)
Contact Type: 51030-0430 (Japan Molex)
Recommended Wire: UL1007 AWG#24 to 26
Figure 2-10 illustrates the External Interface Connection Structure for an Optional Conversion Board.
Figure 2-10
Optional cc-Talk Conversion Board External Interface Connection Structure