JCM Part No. 960-000097R_Rev. 3
© 2010, JCM American, Corporation
1 - 5
General Information
Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU)
Section 1
Specifications
Technical Specifications
Environmental Specifications
Electrical Specifications
Structural Specifications
Table 1-2:
UBA-1x Technical Specification
Acceptance rate:
Refer to the specific Country’s Banknote Specifications when considering
the following Parameters:
98% or greater*
*Note: The following Banknotes types are excluded:
a) Banknotes with excessive or poor magnetism or unclear graphics
b) Double (dual) notes
c) Worn, dirty, wet, torn or excessively wrinkled Banknotes
d) Banknotes having folded corners or edges
e) Banknotes having the wrong cut dimensions or printing displacement
f) When security measures against counterfeiting are implemented, the software
may not fulfill the specified acceptance rate level.
Banknote Types Accepted:
Width: 2.44 – 3.35 in. (62 – 85mm), Length: 4.72 – 6.5 in. (120 – 165mm
[up
to 6.7 in. (170mm) when using a WBA Steel Cash Box]
)
Insertion Direction:
Refer to the specific Country’s Banknote Specifications relative to the
Banknote Types being used
Processing Speed:
Approximately 2 seconds (from Banknote insertion to Vend Signal output)
Approximately 5 seconds (from Banknote insertion to stacking completion )
Diagnostic Indicators:
Front Panel Faceplate LEDs
Escrow:
1 Banknote
Anti-stringing Mechanism:
Pull-Back (PB) Unit (anti-pullback system – JCM Patented)
Cash Box Capacity:
500 notes or more
Interface:
USB 2.0 Compatable (full speed transfer [120 bps])
ID-003 JCM Standard Serial Interface (UBA-10/11/12)
ID-024 OEM Interface
ID-028 JCM USB Serial Interface (UBA-14/24)
(Ask JCM for the proper communication specification for your Unit)
Contact JCM for other Interface requirements if required.
Table 1-3:
UBA-1x Environmental Specification
Operating Temperature:
41ºF to ~ 122ºF (5ºC to ~ +50ºC)
Storage Temperature:
- 4ºF to ~ 140ºF (-20ºC to ~ +60ºC)
Relative Operating Humidity:
30% to ~ 85% RH (non-condensed)
Relative Storage Humidity:
30% to ~ 86% RH (non-condensed)
Visible Light Sensitivity:
Avoid Direct Sunlight Contact
Installation:
Indoors Only
Table 1-4:
UBA-1x Electrical Specification
Supply Voltage:
12VDC ± 5%
(NOTE: Use a power supply with a 4.0A or more capability)
A 24VDC to12VDC conversion board option is available.
Current Consumption:
Standby = 300mA
Operation = 1.6A
Table 1-5:
UBA-1x Structural Specification
Weight:
Approximately 8.81 lbs (4.0kg)
Mounting:
Horizontal
Outer Dimensions:
11.73 in (298mm) High x 8.86 in (225mm) Deep x 4.49 in (114mm) Wide