manualshive.com logo in svg

JCM GLOBAL UBA Series, Operation And Maintenance Manual, Page: 118 / 138

Share
Download
JCM GLOBAL UBA Series Operation And Maintenance Manual Download Page 118

JCM Part No. 960-000097R_Rev. 3

© 2010, JCM American, Corporation

A - 8

Appendix A

Universal Bill Acceptor (UBA-1x-SS & x4-SS-SU)

Troubleshooting

No. 4 Anti-Pullback Mechanism Test

The test listed in Table A-7 detects the 
Anti-Pullback mechanism operational 
condition. 
When the Green and Red LEDs are out, it 
indicates the Anti-Pullback mechanism is 
working properly.

The Green LED will Flash as the Anti-
Pullback Mechanism passes the Home 
Position. 

If there are any problems with the center-
ing mechanism, the Red LED will blink 9 
times. 

Table A-7 

Anti-pullback Mechanism Test Error Conditions

Anti-Pullback

Mechanism

Condition

Red LED 

Status

Green LED 

Status

Causes and Conditions

Anti-Pullback 

Unit Error

9 Flashes

OFF

An Anti-Pullback Home Sensor Board and/or a Lower Sensor 
Board failure may have occurred. Check all harnesses and 
connectors. Exchange the Anti-Pullback Home Sensor Board 
and/or a Lower Sensor Board with a known good board. Refer 
to Section 4 regarding Circuit Board Removal.

DIP Switch Block Settings

If diagnostic LED status is different from 
the Table A-7 listed states, contact JCM 
Technical Support.

Table A-8 

Centering Mechanism Test Error Conditions

Centering 

Mechanism

Condition

Red LED 

Status

Green LED 

Status

Causes and Conditions

Centering 

Mechanism 

Error

14 Flashes

OFF

Centering Mechanism Home Sensor Board and/or CPU 
Board failure may have occurred. Check all harnesses and 
connectors. Exchange the Centering mechanism Home 
Sensor Board with a known good board. Refer to Section 4 
regarding Circuit Board Removal.

No. 5 Centering Mechanism Test

The test listed in Table A-8 detects the 
Centering Mechanism operational condi-
tion. 
When the Centering Mechanism is in the 
Home Position, the Green LED will be 
steady ON.

When the Green and Red LEDs are out, it 
indicates the Centering Mechanism is 
working properly. 

If there are any problems with the Center-
ing Mechanism Sensor Board, the Red 
LED will blink 14 times.

DIP Switch Block Settings

If diagnostic LED status is different from 
the Table A-8 listed states, contact JCM 
Technical Support.

Summary of Contents for UBA Series











































































































































Reviews:

No comments