JCM Part No. 960-000097R_Rev. 3
© 2010, JCM American, Corporation
2 - 5
Installation/Operation
Universal Bill Acceptor (UBA-1x-SS & UBA-x4-SS/SU) Section
2
Connector Pin Assignments (Continued 2)
Table 2-4 lists the UBA-24 Rear Panel Connector Pin Assignments.
Table 2-4
UBA-24 Rear Panel Connector Pin Assignments
UBA-24 Rear Panel Connector
Pin
No.
Signal Name
*
*. Signal name, I/O, and function with parenthesis are for photo-coupler isolation and RS-232C only.
I/O
†
†. I/O (input/output) is the terminal viewed from Bill Acceptor’s side.
Function
1 +12V POWER
+12V DC power
2 GROUND (Power)
0V DC Ground Plain
3 M. RES
In
Bill Acceptor’s master reset signal line
4 NC
Reserved
5 +12V I/F
+12V DC Interface Power
6 NC
Reserved
7 NC
Reserved
8 Vbus
USB Communication Vbus signal line: DC +5V
9 -DATA
IN/OUT USB Communication input/output signal line
10 +DATA
IN/OUT USB Communication input/output signal line
11 NC
Reserved
12 GND USB
USB Communication Ground: DC 0V
13 NC
‡
‡. Short to Pin 20 for use as an SU Unit.
Reserved
14 LED POWER
LED drive line - anode
15 NC
Reserved
16 NC
Reserved
17 NC
Reserved
18 LED- (TTL2)
LED Drive Line - cathode
19 NC
Reserved
20 NC
**
**.Short to Pin 13 for use as an SU Unit.
No Connection
Socket Jack: DRA-20PC-FO (JAE)
Contact Type: D02-22-26P-10000 (JAE)
Socket Plug: DRA-20SC-FO (JAE)
Contact Type: D02-22-26S-10000 (JAE)