Japan Tiger Fast Ethernet 7100e+ User Manual Download Page 10

Page: 10 / 160

Fast Ethernet

7100e

Installing the Fast EtherNet

Major features of the board 7100e+

Compatible with multiple protocols

• Compatible with the four network protocols – EtherTalk,

TCP/IP, IPX/SPX and NetBEUI.

Dedicated network utility included

• The Fast EtherNet can be configured from Windows98/95,

NT4.0 and Macintosh.

Manageable from a Web Browser

• If it is connected with TCP/IP, the Fast EtherNet and the

printer menu can be configured from a Web Browser such
as Microsoft Internet Explorer or Netscape Navigator.

Compatible with SNMP

• Packages an SNMP agent which operates in UDP

The 7100e+ is a general-purpose Fast EtherNet.
Please note that, depending on the printer installed,
some functions may become unusable.

Product identification

Please check that the following products are all present.

The Fast EtherNet itself

Mounting screws (2)

Fast EtherNet

Network software CD-ROM

User Manual (booklet)

Warranty

7100e+.p65

26/08/99, 15:02 PM

Summary of Contents for Fast Ethernet 7100e+

































































































































































Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands

Japan Tiger Fast Ethernet 7100e+, User Manual

Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands