Japan Tiger Fast Ethernet 7100e+ User Manual Download Page 34

Page: 34 / 160

Fast Ethernet

7100e

The “Computer name” name and “Workgroup” name

can be changed using a Web Browser, , etc.

The Master Browser function manages the machine

information which exists within the same Workgroup,
and replies to summary requests from other Workgroups.

The Master Browser function of this Fast EtherNet

operates only if the Workgroup name is “PrintServer”.

The Master Browser function cannot manage anything

other than this Fast EtherNet. If the “PrintServer”
name is put into another Workgroup, the Fast EtherNet
will not be able to find it in the network.

A maximum of 8 Fast EtherNets can be managed by the

Master Browser function.

7100e+.p65

25/08/99, 20:50 PM

Summary of Contents for Fast Ethernet 7100e+

































































































































































Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands

Japan Tiger Fast Ethernet 7100e+, User Manual

Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands