Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 110 / 160

Fast Ethernet
7100e +
110
4 Log into the Fast EtherNet using TELNET.
Example: Logging in the Fast EtherNet when the IP address
is “192.168.20.127”
telnet 192.168.20.127
Trying 192.168.20.127
Connected to 192.168.20.127
Escape character is ‘^]’.
Fast EtherNet 7100e Plus Ver 1.0.0. TELNET
server.
Copyright 1999 (c) Oki Data Corporation
Copyright 1999 (c) Japan Computer Industry Inc.
login: root
‘root’ user needs password to login.
password:
User ‘root’ logged in.
No. Message Value (level .1)
1 : Setup TCP/IP
2 : Setup SNMP
3 : Setup NetWare
4 : Setup EtherTalk
5 : Setup NetBEUI
6 : Setup printer port
7 : Display Status
8 : Setup printer trap
97 : Reset to factory set
98 : Quit setup
99 : Exit setup
Please select (1-99)?
5. Type in the number of the items changed. The details screen
of each item is displayed.
6. Login from the Fast EtherNet.
In order to enable new settings, turn the printer off and then
on again.
If the printer is not turned off and then on again, the
Fast EtherNet will continue to use the pre-
transmission setting values. Make sure to turn the
printer off and then on again.
7100e+.p65 25/08/99, 20:52 PM 110