Japan Tiger Fast Ethernet 7100e+ User Manual Download Page 117

Page: 117 / 160

User Manual

117

English

Using standard setup utility (Windows)

It is possible to set up the Fast EtherNet from a PC running TCP/
IP or IPX/ SPX using the Standard Setup Utility for Windows
supplied with the Fast EtherNet.

Operating environment

A PC with Windows 98/95 or Windows NT Server4.0/
Workstation4.0, running TCP/IP or IPX/SPX (NetWare).

•

Operation on any system other than the above cannot

be guaranteed.

•

This utility cannot be used on a PC which cannot be

connected to the network with TCP/IP or IPX/SPX.

•

This utility must be used on a PC which is located on

the same segment as the printer.

Setting up and using the utility

The following procedure uses Windows98 as an example. Please
have the “Fast EtherNet CD-ROM” ready.

Insert the “Fast EtherNet CDROM” into the PC’s CD-ROM
drive. The Setup Utility starts automatically.

If it does not start automatically, double-click [AUTO
RUN.EXE] in the [WINDOWS] folder on the CD-ROM.

7100e+.p65

25/08/99, 20:53 PM

117

Summary of Contents for Fast Ethernet 7100e+

































































































































































Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands

Japan Tiger Fast Ethernet 7100e+, User Manual

Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands