Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 102 / 160

Fast Ethernet
7100e +
102
4. After making the necessary changes, click on “Submit”.
The EtherNet address (MAC address) will be
displayed in the print menu of the printer.
Once the new values set are transmitted to the Fast EtherNet, the
following screen is displayed. If a different message is displayed,
reconfirm if the values set are appropriate.
5. Type “root” in “User name” and the last 6 digits of the
EtherNet address in “Password”, and click on “OK”.
If the EtherNet address is “00:80:92:01:00:D2”, type
in “0100D2” as the password. On the screen, ******
will be displayed.
6. In order to validate the new values set, turn the printer off
and then on again.
If the printer is not turned off and then on again, the
Fast EtherNet will continue to use the pre-
transmission setting values. Make sure to turn the
printer off and then on again.
7100e+.p65 25/08/99, 20:52 PM 102