Japan Tiger Fast Ethernet 7100e+ User Manual Download Page 70

Page: 70 / 160

Fast Ethernet

7100e

Verification of the printer status

Three states, i.e., the IP address, login user name and transfer
mode, can be verified using the quote command “stat”.

In addition, by specifying the directory after the stat (lp, sjis,
euc), the printer status can be verified.

Example: Displaying the Fast EtherNet status.

ftp> quote stat

211-FTP server status:

Connected to: 192.9.200.82.128.30

User logged in: guest

Transfer type: BINARY

Data connection: Closed.

211 End of status.

ftp>

Example: Displaying the Fast EtherNet status (directory name:
lp)

ftp: quote stat /lp

211-FTP directory status:

Ready

211 End of status

ftp>

7100e+.p65

25/08/99, 20:50 PM

Summary of Contents for Fast Ethernet 7100e+

































































































































































Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands

Japan Tiger Fast Ethernet 7100e+, User Manual

Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands