Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 59 / 160

User Manual 59
English
4. Register the host which was registered in Procedure 2 as the
printer server.
Example: If “OP8c” is registered as the printer server
1. Stop the print scheduler
# /usr/sbin/lpshut
2. Register the print server
# /usr/sbin/lpsystem –t bsd OP8c
5. Set and enable the print queue.
Example: To set the direct output port “lp” with the print
queue “OP8c_lp” and the host “OP8c”,
1. Create the print queue
#/usr/sbin/lpadmin –p OP8c_lp –s OP8c!lp –I any
If you are using csh, type in “\!” or “\” instead of “!”.
2. Start the print scheduler
#/usr/bin/sh /etc/init.d/lp start
3. Activate the print queue
#/usr/sbin/accept OP8c_lp
4. Validate the print queue
#/usr/bin/enable OP8c_lp
7100e+.p65 25/08/99, 20:50 PM 59