Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 105 / 160

User Manual 105
English
Remote Printer Mode Configuring for the remote printer mode
Printer Name for R-Printer Mode
In the remote printer mode, type in the “Printer name” recorded in print server.
Make sure that it is consistent with the printer name recorded in the print server.
The printer name can be up to 31 alphanumeric characters long.
Job Timeout
In the remote printer mode, the time period which lapses
between the reception of the last printing until the job is
completed and the port of the Fast EtherNet released . If the
value set is too short, if the packet is transmitted late printing
may be disrupted. If the value is too high, it affects jobs of
other protocols. Normally use the default. The value set is
between 4 and 255 seconds.
PrintServer Name
In the remote printer mode, type in the “Print server name”
which manages the printer. Up to 8 print servers can be set.
The print server name can be up to 31 alphanumeric characters
long.
NetBEUI Settings Configuring the NetBEUI protocol
Computer Name
Type in the computer name of the Fast
EtherNet. The computer name can be
up to 15 alphanumeric characters
long.
Workgroup Name
Type in the work group name. The work
group name can be up to 15 alphanumeric
characters long.
Comment
For comments. The comment can be up
to 1485 alphanumeric characters long.
7100e+.p65 25/08/99, 20:52 PM 105