Japan Tiger Fast Ethernet 7100e+ User Manual Download Page 130

Page: 130 / 160

Fast Ethernet

7100e

130

Timeout

Polling Time - Set the time for polling the response from the
Fast EtherNet (in seconds).

Using quick setup utility (Windows)

It is possible to set up the Fast EtherNet from a PC running TCP/
IP or IPX/ SPX using the Quick Setup Utility for Windows
supplied with the Fast EtherNet.

Operating environment

A PC with Windows98/95 or Windows NT Server 4.0/
Workstation4.0, running TCP/IP or IPX/SPX (NetWare).

•

Operation on any system other than the above cannot

be guaranteed.

•

This utility cannot be used on a PC which cannot be

connected to the network with TCP/IP or IPX/SPX.

•

This utility must be used on a PC which is located on

the same segment as the printer.

Timeout - Set the timeout for data transmission between
AdminManager and the Fast EtherNet (in seconds).

Retry Time - Set the number of times to retry data transmission
between Admin Manager and the Fast EtherNet.

7100e+.p65

25/08/99, 20:54 PM

130

Summary of Contents for Fast Ethernet 7100e+

































































































































































Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands

Japan Tiger Fast Ethernet 7100e+, User Manual

Search results

Summary of Contents for Fast Ethernet 7100e+

Reviews:

Related manuals for Fast Ethernet 7100e+

Brands by name

Popular brands