Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 143 / 160

User Manual 143
English
Items
Printer type
TAB size
Page width
(letters in a line)
Page length
(lines in a page)
Banner output
Printer Trap
Trap enable
Trap type
Trap address(UDP)
Trap address(IPX)
Status
Ready
Offline
Printer Error
Function
Set Printer type for KANJI filter.
Designate the character width to convert a tab code
(0x09) into a half space (0x20), when outputting data via
KANJI filter. If the width is set to 0, the tab transformation
will not be conducted. The value may vary from 0 to 16.
Set the page width when outputting via KANJI filter. The
value may vary from 0 to 255.
Set the page length when outputting via KANJI filter. The
value may vary from 0 to 255.
Select whether a banner page is output when printing with
LPR or FTP. This setting is valid only for TCP/IP protocol.
Set whether Printer Trap is used.
Set the Local Trap and Global Trap.
Set the Trap Notice Address for UDP. Enter it in a
decimal system as "###.###.###.###". When IP Address
is 0.0.0.0, the trap will not be issued.
Enter the Trap Notice Address for IPX. Enter it as
"Network Address (8 Node Address (12 digits)".
When it is 00000000:000000000000, the trap will not be
issued.
Printer is on-line and ready to receive print data.
Printer is off-line.
Some printer error is caused. "Warming up" means
Printer is getting ready for printing. Please wait for a
moment.
Setup Value
Fixed as PS(PostScript).
Default value
8
Default value
78
Default value
66
YES : With Banner page
NO : Without Banner page
ENABLE : To use this function.
DISABLE : Not to use this
function.
LOCAL
UDP
IPX
Default value
0.0.0.0
Default value
00000000:
000000000000
Note
Please confirm the message
on Printer LCD.
7100e+.p65 25/08/99, 20:55 PM 143