Japan Tiger Fast Ethernet 7100e+, User Manual

Page: 95 / 160

User Manual 95
English
NetWare 3.1 Environment
Under NetWare 3.1, both print server mode and remote printer
mode are supported. Although the procedures for setting the file
servers are the same, there is a difference in the configuration of
the Fast EtherNet. This section describes the settings for the file
server and Fast EtherNet required to print in the NetWare3.1
environment.
See earlier in this chapter for:
• using the NetWare 4.1 print server mode via the NDS
network;
• using the NetWare 4.1 print server mode via the bindery
network;
• NetWare 4.1 remote printer mode.
In the following description, NetWare 3.1 is used as an example.
Some of the on-screen indications and options may vary
according to the OS version and system configuration.
In this example, the Fast EtherNet is connected to the file server
“SOFT22-NW312”.
Starting PCONSOLE
For the purpose of this example we will use F: as the network
drive name for logging in to the NetWare server.
1 On the client machine, log in to the file server (“SOFT22-
NW312”) as supervisor.
F:\>LOGIN SOFT22-NW312/supervisor
2 Start PCONSOLE
F:\>pconsole
[Available Options] is displayed
Available Options
Change File Server
Print Queue Information
Print Server Information
7100e+.p65 25/08/99, 20:51 PM 95