Safety notes for electrical drives and controllers
Page 18
2.2
General notes
In case of damage resulting from non-compliance with the safety notes in this manual, item Industrietechnik GmbH will not
assume any liability.
Prior to commissioning the system, read the
Safety notes for electrical drives and
and
chapter 8.14 (Notes concerning the safe and EMC-compliant
If the documentation in the language at hand is not understood accurately, please contact and inform your supplier.
The correct and safe operation of the servo positioning controller requires the proper and professional transport, storage,
mechanical installation, and project planning – with a consideration of the risks as well as of the protective and emergency
measures – plus the proper and professional electrical installation, operation, and maintenance of the devices.
Only trained and qualified personnel are authorised to work with or on the electrical devices and systems:
TRAINED AND QUALIFIED PERSONNEL
in the sense of this product manual or in the sense of the safety notes on the product itself are persons who are sufficiently
familiar with the project, set-up, installation, commissioning, and operation of the product as well as with all of the warnings
and precautions as per the instructions in this manual and who are sufficiently qualified in their field of expertise:
They have been trained, instructed, and authorised to perform the switching and earthing (grounding) of the
devices/systems in line with the applicable safety standards and to label them accordingly as per the job requirements.
They have been trained and instructed in line with the applicable safety standards in terms of the maintenance and use of
adequate safety equipment.
They have completed first aid training.
The following instructions must be read thoroughly prior to the initial operation of the system in order to prevent personal
injuries and/or damage to property:
These safety instructions must be complied with at all times.
Do not attempt to install or start the servo positioning controller without having read all of the safety
instructions in this document concerning the electrical drives and controllers. These safety instructions and all
other user notes must be read prior to performing any work with the servo positioning controller.
In case you do not have any user notes for the servo positioning controller, please contact your sales
representative. Immediately demand these documents to be sent to the person responsible for the safe
operation of the servo positioning controller.
If the servo positioning controller is sold, rented out, or otherwise distributed to third parties, these safety
instructions must be included.
