Isgus PERFECT 2030, Operating Manual

Page: 98 / 138

5-10 Operation Chapter 5
time cards due to employment status. After deleting the
employee time card, the supervisor will then disable the feature.
If the time recorder is used for non-time-and-attendance
applications such as job costing and parking lot operation, this
application is also used when a job is finished or when the car
leaves the parking lot.
Card validity
duration
By enabling this feature, time cards are automatically deleted
from the time recorder’s memory after the time card has not
been used by a user defined number of days.
Time Card
IN/OUT punches made on one PERFECT time recorder are
Initialization. unknown to other PERFECTS. Therefore, if you have more
than one PERFECT, you must ensure that individual time cards
can only be used in
one of them. To do this, the user assigns a
different range of numbered time cards to each time recorder.
Time cards come sequentially numbered in boxes of 1000. The
feature “CARD INITIALIZATION” . allows you to limit which time
cards can be used on which time recorder. The programmable
number range is from 000,001 to 999,999 but the number
range you program must coincide with the numbers of your
stock of time cards.
Important: Please note that the number range you program
does not change the 500 time card total capacity of the
PERFECT'S memory.
Memory capacity:
The time recorder can store up to 500 time card totals.
The memory capacity is fixed and cannot be changed.
Important: When the 500 time card total memory capacity limit
is reached, and a new card is used, the time recorder
automatically deletes the card with the oldest punch.
It does not reject the new card .
Card Management Options
Time cards can be deleted by means of all of the preceding methods, either
individually or in combination with each other. Please find below some possible
configurations.
Using the factory default settings
Your PERFECT 2030 was shipped from the factory with standard default
settings designed for the least complicated applications. In many cases, these
default settings will suffice and all you will need to do is plug in the power
supply and start using the time recorder .
In this factory default mode, all time card numbers are enabled (000001 to
999999) and when the 500 time card total memory capacity is exceeded, the