Isgus PERFECT 2030, Operating Manual

Page: 78 / 138

4-46 Getting Started Chapter 4
Change or Delete Values for Signal Operation
The signal program entered during start-up can be modified or deleted at any time.
Use the copy function in order to modify or delete several days at a time.
Procedure:
1.
Call-up the programming routine. (" R " key)
2. Select the menu "Signal Operation" (" S " key)
3. Select the day on which the changes shall
be carried out.
(" R " key)
4. Call up the time value to be changed. (Click through with " E " key)
5. Change signal duration and/or time value. (" R " and " E " keys)
If you want to delete the displayed time value,
set the 1. input field "Signal duration" to "
− −
"
and confirm with " E ". The 2. input field "Time value"
will be deleted and the subsequent pair of values
(signal duration and time value) will be displayed.
→
To make further changes for this day
repeat steps 4 and 5.
6. Complete programming for this day: (" S " key)
→
In order to make changes for other days,
repeat steps 3 to 6 or:
7. Activate the next input level "Copy function" in order to
copy the changed day to other days. (" S " key)
8. The "copy to“ day range is defined. (" R " and " E " key)
9. Quit copy function. (" S " key)
10. Quit the menu "Signal operation". (" S " key)
→
Date and time are displayed and the programming routine
is terminated automatically.
Hint
If you want to delete the entire signal program, just delete the
program for one day and then copy that day to the rest of the
days in the week.
If you just "disable" the feature, the time recorder still remembers
the existing programming and restarts it the next time you
"enable" the feature.