manualshive.com logo in svg

Isgus PERFECT 2030, Operating Manual

Share
Download
Isgus PERFECT 2030 Operating Manual Download Page 105

 Chapter 

5 

Operation  

5-17 

4.

  Insert time card with new card number. 

Hint: 

The function or the display message remains active 

for about 5 seconds. If no card is inserted during this time 
the message will revert to the display prompt requesting 
you to enter the card number of the lost or damaged time 
card.  

The time recorder checks whether the new card already 
exists memory. 
If the new time card does exist in the time recorder’s 
memory, it rejects the card with the message 

CARD BEING USED 

When the recorder accepts the time card, the new card 
number is saved and the total is carried over to the new 
time card number.  
The time card record with the old card number is deleted 
automatically. 

Hint: 

No values are printed out on the new card. The 

recorder returns the card immediately. 

5.

  Remove the new card. 

The recorder displays the parameter "REPRODUCING 
CARD". 

6.

  Now you can choose to reproduce additional time cards or 

quit the programming routine. 

Scroll through programming routine until 

(key "

S

") 

the date and time are displayed again. 

 
 
 

Summary of Contents for PERFECT 2030











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands