4-14 Getting Started
Chapter 4
Programming keys
R
Key
R
→
Change the displayed value.
A value can be changed when flashing in the display.
If the key is pressed once, the value will be
increased by one.
If the key is pressed continuously the value increases
in fast mode.
E
Key
E
→
Confirm the values entered.
Use this key to switch to the next value or next digit in
the current menu item without changing any value.
S
Key
S
→
Skip to next parameter or menu item.
If not all required values are entered for a menu item,
the "S" key will not move you to the next.
→
In normal operation column selection by position key.
Programming-LED’s
1 2 3 4 5 6 7
→
The seven LEDs are for weekday programming.
Each flashing LED represents the day for which the
necessary change timing needs to be programmed.
LED 1 = Monday to LED 7 = Sunday.
Digital display
.
.
.
.
.
.
D1
D2
D3
→
Separation into the fields D1, D2 and D3.
→
When recorder is closed, only field D3 is visible.
→
In normal operation current date is displayed.
→
The decimal point flashes always. In case of DCF-
connection or slave clock function it goes off with no
reception.
→
In programming mode the active digit is marked
by a flashing LED. A flashing LED indicates that the
displayed value can be changed.
