Chapter 4
Getting Started
4-19
Showing or Setting the Time of the Internal Quartz
If you want to check the time of the internal quartz clock, proceed as described on
this page. The command "Indication only" to the internal quartz clock doesn’t cause a
manual setting of the hands.
1.
Select menu for time using "
E
".
Keep "
E
" pressed until column pointer marks the symbol for the time.
Current time is displayed, hour-display flashes.
2.
If the right time is displayed confirm setting using "
S
".
→
Current date is displayed.
3.
Skip the date display by confirming each field using "
E
".
After the key has been pressed the 3rd time, the menu is left.
→
Recorder returns to current date.
If you want to set the time, you have to use the keys "
R
" and "
E
" instead of "
S
" in
step 2.
Proceed as described under the topic "Set date and time".
A change of the internal quartz clock is always followed by a manual hand setting of
the analogue clock and a synchronisation between quartz and analogue clock.
Synchronizing the Analogue clock
If the time printed on a time card differs from the time of the analogue clock, the
analogue clock has to be synchronised with the internal quartz clock.
Proceed as described under "Set date and time" in this chapter. Confirm hours and
minutes using "
E
" and set hands of the analogue clock when display shows
"Synchronise analogue clock".
Confirm date using "
E
".
Now the synchronisation will be started and the time menu is left.
After synchronisation has been executed, current date is displayed.
Check analogue clock with a sample clocking.
Setting the Date only
Proceed as described under "Show/Set time of internal quartz clock" and under "Set
date and time" in this chapter.
Date can be changed using "
R
".
