Chapter 5
Operation
5-5
Clocking with Mixed Column Selection
The recorder is often programmed with mixed column selection. The first columns for
the IN- and OUT-clockings in the morning and in the afternoon are defined as
automatic columns, the other columns are defined as manual columns. In these
manual columns extra times, e.g. overtime, interruptions, etc. are printed.
If a clocking column is selected manually with the position key, the column pointer
switches back to the current automatic column after the clocking has been printed. If
no clocking is executed, the column pointer switches back to the automatic column
after about 3 seconds.
Proceeding
1.
Current date
is displayed.
.
The current date must correspond with the
clocking line on the time card, e.g. here
line 21.
.
Do you want to book an extra time?
→
Manual selection, continue with step 2.
.
Do you want to execute an IN- or OUT-
clocking?
→
Automatic selection, continue with
step 3.
2.
Select clocking column with
position key
.
.
Press position key so often until desired
clocking column is marked.
3.
Insert card into card funnel.
Press card slightly down until clocking is
released.
4.
Remove card from recorder.
.
With manual selection, the position key
switches back to the automatic column.