Chapter 4
Getting Started
4-47
4. Enter new time with "
R
".
5. Quit setting by pressing "
S
" and select
next weekday or continue as described
under step 9.
9.
Quit menu "Column change timing" with "
S
"
and switch to next menu item "Card lift timing".
.
When time values are entered for the first
time respectively after a reset, all values
have to be entered for each weekday
before the menu can be left.
The times of the previous day are
offered as default values for the following
day. When last time value has been
entered, the menu can be left with "
S
".
Standard Recorder with Two Card Lifts per Day
If two daily card lifts shall be made, each day is arranged in two lines, e.g. all
clockings in the morning are printed in the first line and all clockings in the afternoon
are printed in the second line. See separate card catalogue, card format no. 06.
The timing for the first line has to be programmed first, then the timing for the second
line. The distinction between first and second line is displayed in field D1.
D1 =
Line / Column
11 = first line of weekday (left digit)
and
11 = first clocking column (right digit)
The number of columns depends on the card format selected/defined. With every
confirmation with key "
E
" the column counter will be increased automatically. After
the last clocking column of the first line the displayed value of field D1 changes to the
second line of the clocking day.
→
D1 = 21 = second line / first column.
The values for the second line can now be entered.
The programming of the values is identical to proceeding "standard recorder with one
card lift per day".