4-46
Getting Started
Chapter 4
3.
D1
D2
D3
.
Select
hour
with "
R
".
Definition:
D1 = column, 01 = 1. clocking column
The number of columns depends on the
card format selected/defined.
D2 = hours
Value range:
00 - 23; --
.
If "--" is selected, all time values for this
day will be erased.
Confirm hour with "
E
".
.
If the field D2 is programmed with "--", this
column is defined as manual column for the
current day. If a clocking should be printed into
this column, the column must selected
manually (position key).
D1
D2
D3
.
Select
minutes
with "
R
".
D3 = minutes
Value range:
00 - 59
Confirm minutes with "
E
".
4.
D1
D2
D3
.
Repeat step 3 for the remaining clocking
columns and their timing.
5.
After the last column value has been entered,
press "
S
".
6.
1 2 3 4 5 6 7
Select next weekday with "
R
".
7.
1 2 3 4 5 6 7
Confirm weekday with "
E
".
The LED lights permanently.
8.
D1
D2
D3
.
Repeat steps 3 to 7 for the remaining weekdays
and their timing .
.
If the time values for the column changes
have already been programmed and you
only want to change a single value of a
certain weekday you need not to advance
through all weekdays.
1.
Select desired weekday with "
R
".
2.
Confirm weekday with "
E
" - first
column value is displayed.
3.
Press "
E
" until column with the value
to be changed is displayed.