4-20
Getting Started
Chapter 4
Programming Customer Requirements
To program individual customer requirements two possibilities are available:
•
Programming via programming panel at the recorder
•
Programming via PC.
Hint
Please note that the PERFECT 2020 is designed for use around
the world. In order to simplify the programming of your
requirements, we have placed programming values applying to
North American work places at the top of each paragraph.
Besides we have highlighted those values in extra bold
characters.
Programming with the Programming Panel
Customer requirement programming is done using menus and submenus.
Each menu item is represented by a symbol on the programming panel. Please note
that the recorder must be open to access the programming panel.
When the programming routine is started, the column pointer switches to the second
symbol .
Each menu items has to be selected, and programmed or confirmed, in
chronological order. The column pointer indicates the currently active menu item.
Different parameters are entered with special code-numbers that are selected using
"
R"
.
It is possible to switch to the next menu item or parameter by pressing the key "
S
". If
a parameter must be entered, the key "
S
" will not be valid until this value has been
entered.
You can check the value of a menu item by pressing "
E
". Pressing "
E"
will display
the value of the menu item, it will not change the value.
You can find a summary of all symbols and the use of the keys in this chapter under
the section "Programming Panel".
Attention
Once programming has started, it must be completed; otherwise,
all parameters could be lost when the time recorder is restarted.
If this happens, all values have to be re-entered.
