4-66
Getting Started
Chapter 4
Programming via PC
To program the recorder via PC, the program "P2020" and the connection cable
between recorder and PC are required.
Supply:
-3,5 " diskette
- connection cable
Programming the recorder via PC is the most elegant and easiest way to adjust the
recorder to any customer setting. While you are programming the recorder via PC,
the program "P2020" offers you a help function for each menu item. With the
function key F1 information concerning the programming can be inquired.
Different ways of programming are possible:
•
Connect recorder with the PC, execute programming at the PC and transfer
values to the recorder.
•
Program all values on the PC without the recorder being connected, save
values in the PC and transfer the values to the recorder later.
General Conditions for the Program "P2020"
•
IBM-compatible PC, XT/AT and higher
with a pulse rate of not more than 133 Mhz.
•
Operating system MS-DOS, Version 3.1 and higher,
or DR-DOS, Version 4.0 and higher.
•
640 KB conventional memory.
→
memory needed: approx. 150 KB
•
Approx. 200 KB free memory on harddisk/diskette.
•
Standard screen interface monochrome or colour.
•
Printer to print out all parameter values programmed.
