4-8 Getting Started
Chapter 4
7.
Open the screw of the guide wedge until the complete guiding element can be
moved. Insert a card with a certain card width, e.g. a time card, into the card
funnel and adjust the card wedge. Do not adjust the card funnel too tight.
Tighten screw of the guide wedge.
1
2
3
Fig. 14: Card funnel adjustment
(1)
Programming panel
(2)
Guide wedge for card funnel
(3)
Screw for guide wedge adjustment
8.
Adjust card guide.
→
See fig. on the next page.
Open
left
guide rail with the two screws. Insert card completely into card
funnel. If necessary move controller for card lift adjustment downwards by
turning the transport spindle, until the card can be inserted far enough into the
card funnel.
Adjust guide rail to the card, so that a safe card guide is possible. The left
guide rail have to be adjusted parallel to the right one.
Check a smooth sliding fit by moving the card upwards and downwards.
Tighten both screws of the guide rail.
9.
Push programming panel backwards until locking straps engage.
