Pag. 14
ENGLISH (Translation of original instructions)
8.3 LAY-OUT
+M1
Side brush motor power supply positive pole LED:L1
+M2
Centre brush motor power supply positive pole LED:L2
+M3
Suction fan motor power supply positive pole LED:L3
+M4
Filter shaker motor power supply positive pole LED:L4
+M5
Motor differential power supply positive pole
-M1
Side brush motor power supply negative pole
-M2
Centre brush motor power supply negative pole
-M3
Suction fan motor power supply negative pole
-M4
Filter shaker motor power supply negative pole
-M5
Motor differential power supply negative pole
F1: 1.25A 250V fuse for card protection
F2: 50A bar fuse for motor protection
F3: 50A bar fuse for motor differential protection
TR1: brake regulation trimmer
L1-L4: Relais functioning's indication led lights.
NOTE: The 4 LED lights' function is to indicate the correct
functioning of the 4 relais assembled on the circuit board.
For every relais' closing, there is the lighting up of the respective
led light.The led light remains lighted just in the while in which the
relais closed its contact.
A:
- Board alimentation
B:
- General alimentation
C:
+ Board alimentation
D:
+ General alimentation
E:
- Board alimentation
F:
+ Board alimentation
Summary of Contents for 1010 E
Page 1: ...1010 E JET 1000 E 1020 E...
