56
ASSEMBLY AND INSTALLATION
inVENTer
®
iV14R/iV14V ventilation system
•
Installation and operating instructions
Fitting inner cover V-284x284
TIP
How to install inner cover V-284x284 is shown below using a round wall sleeve as an example.
The same steps should be followed when installing a square wall sleeve.
Requirements:
Thermal accumulator insert is itted.
The reversible fan's start direction is set.
TIP
Make sure that you it the dust ilter correctly to prevent the ventilation unit malfunctioning.
►
Remove the hex key (2) from the inner cover
base plate (1).
1
2
►
Centre the inner cover base plate (5) over the
wall sleeve's (4) ixing elements (3) on the
interior wall.
Make sure,
that the long spacers (green
arrows) are pointing upwards.
►
Loosely turn the screws and washers (6) into
the ixing elements (3) on the wall sleeve.
5
6
4
3
►
Tighten the screws for the inner cover base
plate (7) using the hex key (8).
7
8