intrepid Intrepid 6140 Director, Installation And Service Manual

Page: 161 / 430

Maintenance Analysis Procedures
3-41
Maintenence Analysis Procedures
modify the IP address access control list, product-level authentication
settings, port-level authentication settings, and challenge handshake
authentication protocol (CHAP) sequence to ensure device access to
the product.
• EFCM Basic Edition - Refer to the
McDATA EFCM Basic Edition
User Manual (620-000240).
• Element Manager - Refer to the
McDATA Intrepid 6140 and
6064 Directors Element Manager User Manual (620-000153).
Was the maintenance action successful?
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
14
A port is set to an inactive state.
a. At the Event Log , examine the first two bytes of event data.
b. Byte 0 specifies the port reporting the problem. Byte 1 specifies
the inactive reason ( Table 3-12 ).
15
A port is inactive because Flexport Technology is disabled. Install the
Flexport Technology PFE key to enable N_Port capability (
Task 16:
Configure PFE Key (Optional) on page 2-51 and Install PFE Keys
(Optional) on page 2-25). Exit MAP.
16
A port is inactive because the:
• Port cannot operate at the product (backplane) speed.
Table 3-12 Inactive Port Reasons and Actions
Byte 1 Inactive Port Reason Action
02 Feature key not enabled. Go to step 15 .
03 Switch speed conflict. Go to step 16 .
04 Optics speed conflict. Go to step 16 .
06 Port swap conflict. Go to step 17 .