intrepid Intrepid 6140 Director, Installation And Service Manual

Page: 235 / 430

4
Managing Configuration Data
4-55
Repair Information
3. Select Restore Configuration from the Maintenance menu at any
view. The Restore Configuration View displays ( Figure 4-23 ).
Figure 4-23
Restore Configuration View
4. At the Download Configuration file from field, select the file from the
PC hard drive using the Browse button or type the filename.
5. Click Send and Load Configuration. A message box displays,
indicating any browser operation will terminate the configuration
download.
6. Click OK to download the configuration. The process takes
several minutes, during which the browser is unavailable. When
the process completes, the message Configuration restored
successfully.
displays.
Reset Configuration Data (EFCM Basic Edition)
When configuration data is reset to factory defaults, the director
defaults to the factory-set IP address and all optional features are
disabled. To reset configuration data to factory defaults:
1. Notify the customer that the director will be set offline. Ensure
that the system administrator quiesces Fibre Channel traffic
through the director and sets attached devices offline.
2. Set the director offline ( Setting the Director Online or Offline on
page 4-36).
3. At the EFCM Basic Edition interface, select Switch from the
Maintenance menu at any view. The Switch View displays.
4. Click Reset Configuration. A dialog box with the message "Are you
sure that you want to reset the configuration?"
displays.